A Walk in the Woods- Mini Tote Tutorial

Aneela, Moda fabric designer extraordinaire kindly sent me and some other UK bloggers generously filled parcels full of scraps from her forth coming line A Walk in the Woods, released Spring 2012, what a treat!  I knew the first thing I was going to make, and here it is.

This is an easy adaptation of my mini tote tutorial.  I made this one for my niece's Christmas present, you know how young children love bags for carrying their treasures and the fabric is perfect for fussy cuts. A multi-functional gift ready for a game of eye spy as well as filling with goodies.   This bag is 7" square finished size not including the handles.  Wanna make one? read on.

You will need:

For the front and back- Fussycut eighteen 2" Squares 

Sashing strips for the front blocks- Cut two strips 1 3/4" x 5" and two strips 1 3/4"x 7 ½  from a light solid e.g. Essex linen

For the Straps- Cut two strip 3"x 8" from co-ordinating fabric

Lining-Cut two 7 1/2" squares from co-ordinating fabric

Fusible Fleece- Cut two 7 1/2"squares  e.g. Vilene 630 fleece interlining (supplied by Julia at Gone to Earth).  You could also use cotton batting or interfacing.

Letter stamps and Versa craft ink pad

Embroidery thread for the running stitch detail- I used Sashiko thread

Sewing supplies

Seams are 1/4" throughout.

Step 1: Making the Front and Back

Stitch your squares together in rows of 3. On the top and bottom row press the seams to the left and on  the centre row press seams to the right.

Join your  3 rows of squares matching up the points at the seams.

I stamp my sashing before I stitch it on.  I use Hero Arts Clear design rubber stamps and Versacraft ink.  This is heat set with an iron. Let the stamps dry for a few minutes, cover with a bit of scrap cotton and press for 15 seconds with a medium hot iron.  Remove the scrap cotton and repeat two more times and press on the reverse as well.  Then, add your sashing.

The rest of the bag follows the tutorial here from Step 2.   The only addition you will need to make is to add the running stitch detail.  I add this at the beginning of step 3, after I have added the fusible fleece but before I add the handles.  

Hadley did a lovely version of Ayumi's wristlet pattern with the same fabric and more fussy cut squares see here. 

 Thankyou Aneela, I think everyone was thrilled with their fabric parcel x

Candy Cane Mini Tote Bag Tutorial

My new Candy Cane Love pattern pdf includes two canes in mirror image which join together to make a candy cane heart.  The block is perfect for a mini tote bag.

A little bag perfect for putting filling with treats or a present in itself!  The finished tote bag is 7.5" Square.  There is a gadget at the bottom of the post for printing this pattern with and without the photos.

To make a Mini Tote you will need:

For the front- 7"x7" Square Candy Cane heart block (pattern available to buy here).  You could use any quilt block 7" square. 

Sashing strips for the front blocks-2 strips 1" x 7" and 2 strips 1"x 8"from a co-ordinating fabric

For the back-8"x8"Square from the same co-ordinating fabric as the strips

For the Straps- Cut 2 strips 3"x 8" from same co-ordinating fabric

Lining-Cut 2 squares 8"x8", contrasting fabric

Fusible Fleece- 2 squares  8"x8".  I used Vilene 630 fleece interlining (supplied by Julia at Gone to Earth).  You could also use cotton batting or interfacing.

Sewing supplies-thread, rotary cutter etc.

Step 1- Sashing the front

Stitch sashing strips to the top and bottom of the 7" square block.  Press seams away from the block.  Repeat adding sashing strips to the left and right sides.  Block should now be 8 x 8".  

Step 2- Making the Handles

Take the 3" x 8" handle strips and fold length ways so the long edges meet and press.  Open out and bring both long outer edges in towards the centre fold.  Leave a small gap, less than 1/8 inch between them, press again creating fold on the outer long edges. Bring the folds together and stitch as close as you can to the outer edge.  Repeat for the other handle.

Step 3- Adding the Handles

Fuse fleece/interfacing to the wrong side of the front and back bag pieces.  If you are using batting you could use basting spray or tack/baste your batting to the front and back pieces.  Mark the centre of the top front and back bag pieces (right side facing) with a pin.  Place handles an inch either side of the pin so that each handle loop is lying downwards on the bag.  Stitch along the top edge to secure the handles 1/8 inch from the outer edge.   

Step 4- Making Bag Outer and Lining

Take the front and back bag pieces with handles attached, with right sides together, stitch 1/4" seam along side, bottom and side edge.  Use very small stitches around the bottom corners and trim the corners.  Turn through to the right side.  Press side seams open at the top of the bag-this is to make seam matching easier when you stitch the bag outer and lining together.  Place the lining squares right sides together and stitch from the top edge, down the side and a little way accross the bottom, securing the seam at this point.  Leave a 4" gap at the bottom to turn the bag through in the next stage.  Repeat on the other side seam.  Trim corners.  Press seams open at the top of the lining side seams.  Leave the lining with the wrong side outwards.

Step 5- Joining Outer bag and Lining

Place the outer bag inside the lining so the right sides are facing each other.  Use the open side seams to match up the outer and lining as in the picture, use pins to hold in place.  The handles should be lying downwards.

Stitch all around the top edges sewing through the lining and bag outer with a 1/4" seam.  Turn the bag through the 4"opening in the lining.  Press.  Close the opening with ladder stitch or by machine.  Top stitch around the top edge of the tote bag.  Fill with goodies and get ready to give- you weren't keeping it for yourself were you?